> From: Jack Roth <jack @
picksys .
com>
> I'm trying to put together a firewall. We're using SCO 3.2v4.2 on a
> Dec 433ST. We're having trouble adding a second ethernet card. The cards
> and driver's we're using are:
>
> 3Com 3C503 as e3B0 using the 3Com 503 Ethernet driver, board 0 (to router)
> 3Com 3C509 as e3E0 using the 3Com Ethernet Link III driver, board 0 (to lab)
>
> Has anyone gotten these two boards to work in a SCO box?
> Has anyone gotten 2 ethernet boards to work in a SCO box, if so which boards
> and drivers are you using?
Multiple ethernet cards are definitely supported. I have several machines
here with 4 cards in them at the moment (1 has cards from 4 different
manufacturers). I personally have not used a 509 card, I would think it
must be a configuration problem.
Send me email directly with the symptoms, and I'll see if I can figure
out what you did wrong.
Larry
---
Larry Philps Senior Software Engineer larryp @
sco .
com
SCO Canada, Inc., 130 Bloor St. West, 10th floor, Toronto, Ontario. M5S 1N5
Phone: (416) 922-1937 Fax: (416) 922-2704
References:
|
|
