I believe NAT will not take effect until the next Policy Install.
Bill
As previously stated by Raymond Sleiman
>Hello,
>I defined address translation on a firewall gateway as fellow:
>
>193.246.62.140 193.246.62.140 DST_STATIC
>195.176.150.10
>195.176.150.10 195.176.150.10 SRC_STATIC
>193.246.62.140
>
>I add with arp -s 195.176.150.10 ehternet_address of the machine
>193.246.62.10 PUB.
>I also defines staic routes to 193.246.62.140 using the internal
>interface of the firewall.
>route add 195.176.150.10 Ipaddress of the internal interface
>193.246.62.2
>
>The internal interface has 193.246.62.2 as IP address.
>The external interface has 195.176.150.2 as IP address This address in
>registered address.
>
>the class 195.176.150.0 is a registeres class
>the class 193.246.62.0 is not a registered address.
>Adresses are samples and not reality.
>
>The problem: i am not able to ping the translated address 195.176.150.10
>from the internet and from the inside and from the gateway itself.
>
>Could someone tell me what is wrong ?
>
>Another question: where we should define address translation.
>How to load address translation table ( xlate.conf ) ? DO we have to
>lunch a command to load address translation configuration ?
>
>is static routes are correct ?
>Best regards
>Raymond Sleiman
>
Please remember to always flame via private eMail - the rest of the group
is just not interested.
|
|
