Check to see if on your log viewer, if you are trying to resolve IP addresses with DNS. If so, for each entry in the log, the machine queries DNS to try and get a name associated with the IP address entry. This is for both the source and destination addresses, meaning 2 queries are executed for each log entry. Disable that option (should be on the main log viewer screen), and your problem should disappear.
Hope this helps.
At 08:06 AM 7/3/97 +0200, Stefan Witzel wrote:
>I tried to run Firewall-1 V3.0 (not 3.0a) on a workstation with HP-UX 10.20
>installed. The firewall seems to be ok, but when I start the log viewer (from
>the command line), after a while, this process uses up to 95% of the CPU
>I then have no access to the workstation. (I think the firewall works.)
>This occured under VUE and CDE.
>Any advice? Thanks in advance.
>Stefan Witzel switzel @ uni-goettingen . de
>Universitaet Goettingen / Stabsstelle DV -------------------------
>Gosslerstrasse 5-7 fon: +49 551 394160
>37073 Goettingen fax: +49 551 399612
Darwin L. Martinez Client: 770-825-9482
Network Systems Consultant Pager: 888-346-1320
International Network Services Office: 770-641-3660
SouthEast Region, Atlanta Email: <mailto:darwin_martinez @ ins . com>
INS Website: <http://www.ins.com>
"Providing the Power of Operable Networks"