The first thing I would try would be to upgrade to FW-1 Version 3.0a. I
know it fixed "throughput" problems - not sure if they were CPU related or
not. Just to be on the safe side I would upgrade anyway.
At 08:06 AM 7/3/97 +0200, Stefan Witzel wrote:
>I tried to run Firewall-1 V3.0 (not 3.0a) on a workstation with HP-UX 10.20
>installed. The firewall seems to be ok, but when I start the log viewer
>the command line), after a while, this process uses up to 95% of the CPU
>I then have no access to the workstation. (I think the firewall works.)
>This occured under VUE and CDE.
>Any advice? Thanks in advance.
>Stefan Witzel switzel @
>Universitaet Goettingen / Stabsstelle DV -------------------------
>Gosslerstrasse 5-7 fon: +49 551 394160
>37073 Goettingen fax: +49 551 399612
Steve Rodgers, MCSE Network Systems Engineer
International Network Services Phone: 913-859-1836
http://www.ins.com Pager: 888-808-2626
com NASDAQ: INSS